Enantioselective construction of carbobicyclic scaffolds

Allylic and benzylic Grignard reagents smoothly open phenylalkynyl-activated cyclic trisubstituted epoxides at the more substituted carbon atom to give secondary alcohols with a chiral quaternary center. These alcohols are good substrates for the construction of enantiomerically pure carbobicyclic scaffolds through intramolecular alkylation.     

Transition metal substituted tungstophosphoric compound catalyzed oxidation of hexanol to hexanal with hydrogen peroxide

Summary The oxidation of hexanol in the presence of the Keggin-type heteropoly compounds (HPCs) H₃PMo_nW_12-nO₄₀ (denoted as PMo_nW_12-n, n=0,1) and Na₅PW₁₁ZO₃₉ (denoted as PW₁₁Z, Z = Mn, Fe, Co, Ni, Cu and Zn) was carried out to produce hexanal and hexanoic acid. The reaction was conducted in tert-butanol (t-BuOH), using cetylpyridinium bromide (CPB) salts of HPA and 15% aqueous H₂O₂ as oxidant under mild condition. The PMoW₁₁ catalyst showed higher hexanol conversion of 25%, the lowest selectivity to hexanal of 64.4% and an efficient utilization of H₂O₂ of 34%. Over the transition metal substituted PW₁₁Z catalysts decomposition of H₂O₂ was rapid. For these PW₁₁Z catalysts, the efficient utilization of H₂O₂ decreased to 9% or even lower. By means of IR, UV-visible and GC-MS techniques the catalysts were characterized.     

Utilization of hypervalent iodine in organic synthesis: A novel and facile two‐step protocol for the synthesis of new derivatives of 1H‐Imidazo[1,2‐b]pyrazole by the cyclocondensation involving α‐Tosyloxyacetophenones

A series of new 2‐aryl‐7‐cyano/ethoxycarbonyl‐6‐methylthio‐1H‐imidazo[1,2‐b]pyrazoles ( 5 ) have been synthesized in moderate to good yields, via a two‐step cyclocondensation procedure of 5‐amino‐4‐cyano/ethoxycarbonyl‐3‐methylthio‐1H‐pyrazole ( 1 ) and α‐bromoacetophenones ( 3 ) or α‐tosyloxyacetophenones ( 2 ), which were prepared by the reactions of acetophenones with [hydroxy(tosyloxy)iodo]benzene (HTIB). The intermediates, 5‐amino‐1‐(aroylmethyl)‐4‐ cyano/ethoxycarbonyl‐3‐methylthio‐1H‐pyrazoles ( 4 ), have been isolated, serving as evidence for the regioselectivity. When utilizing α‐tosyloxy‐acetophenones, the reactions were more eco‐friendly, the reaction time was significantly reduced and the synthetic procedure was more convenient and easier to manipulate. Surprisingly, using potassium carbonate to displace sodium carbonate in the synthesis of 4 , in the case of 1 (R? CN), two novel cyclocondensation products have been isolated and fully characterized, followed by the proposal of a plausible mechanism.     

Changes in the composition of volatile monoterpenes and sesquiterpenes of Pinus armandi, P. tabulaeformis, and P. bungeana in Northwest China

The volatile mono-and sesquiterpenes obtained from the needles and resin of Pinus armandi, P. tabulaeformis, and P. bungeana growing in the Qinling, Taibai, and Huanglong Mountain forest ecosystem were analyzed by means of GC-MS. Forty-eight constituents were identified, and α-pinene, β-pinene, 1R-α-pinene, β-caryophyllene, cadindiene, α-caryophyllene, D-limonene, and 1S-β-pinene were the major components of the mono-and sesquiterpenes in the needles and resin. The components of the volatile mono-and sesquiterpenes from the needles and resin at Qinling, Taibai, and Huanglong Mountains had remarkable differences in three pine species, whereas the monopertene content such as α-pinene, β-pinene, D-limonene, and camphene were mostly changed in the growing stage. The intraspecies variation in the different ecosystems can be attributed to the species’ geography and genetic variation, and even the adaptation of the pine species to different ecological environments. Moreover, monoterpenes and sesquiterpenes can be induced by the attack of bark beetles, of which the α-pinene, β-pinene, 1R-α-pinene, 1S-α-pinene, b-myrecene, and β-caryophyllene contents had positive relations with the attacking Dendroctonus armandi and D. valens. Published in Khimiya Prirodnykh Soedinenii, No. 5, pp. 430–433, September–October, 2006.     

烯烃歧化催化剂Bu~4N[Mo(CO)~5Cl]-RAlCl~2活性衰减原因的探讨

考察了影响Bu_4N[Mo(CO)_5Cl]-RAlCl_2烯烃歧化催化剂活性的一些因素和反应过程中的动力学行为,并着重讨论催化剂活性衰减的原因。催化剂失活主要是由于形成的金属卡宾活性物种分解所引起。最后分析了烯烃加入顺序对催化剂活性的影响。     

Neutron activation analysis of gold and iridium in steel

A method of determination of trace gold and iridium in steel is presented. The samples were preconcentrated with an anion exchanger. The chemical recoveries were determined by an isotope tracer technique using¹⁹⁸Au and¹⁹²Ir.     

2-溴丙酸气相热消除反应的机理

用密度泛函（DFT）方法,在B3LYP/6-31G**水平上对2-溴丙酸气相消除反应机理进行了研究.计算表明,反应主要是通过半极化五元环结构过渡态进行的,羧基上的氢原子协助溴原子离去,羧基氧原子帮助稳定过渡态.在B3LYP/6-311＋＋G(3df,3pd)水平上对B3LYP/6-31G**优化的几何构型进行了单点能计算,计算所得反应的速度控制步骤的活化能为189.461 kJ•mol－1,偏离实验值((180.3±3.4) kJ•mol－1)5.08％.     

Sharpless四唑合成中捕获双四唑锌配合物

The reaction of malononitrile with ZnCl₂ and NaN₃ in the presence of 2,2′-bipyridine and water affords the first bis(tetrazole) Zn-complex intermediate, mono(2,2′-bipyridine)bis(tetrazolyl)methane aqua zinc(Ⅱ), [Zn(2,2′-bpy)(BTZ)(H₂O)]·(H₂O)₂ (1) which gives a clue for Demko-Sharpless′ tetrazole synthesis. Crystal data for 1: C₁₃H₁₈N₁₀O₄Zn, M_r=443.74, monoclinic, space group P2₁/c, a=12.5705(18), b=16.078(2), c=9.1921(13)?, β=95.010(3)°, V=1850.7(5)?³, Z=4. CCDC: 197788.     

CPCWS中水质子的核磁共振自旋晶格弛豫时间和化学位移

运用核磁共振手段，揭示了浆体中水的形态及其动态行为，并研究浆体性质与之的关联.实验测得神府煤-石油焦-水浆（CPCWS）中水质子的化学位移与煤焦中煤的百分含量的线性关系.并从NMR测得束缚水的化学位移δb ，导出计算浆体中束缚水百分含量的公式.从CPCWS中水质子的化学位移与浆体表观粘度的相关曲线可确定最佳配比的浆体.测得全焦浆中水质子自旋-晶格驰豫时间T1比全煤浆大42倍，讨论了CPCWS的T1随煤含量的变化趋势.实验表明,T1可作为CPCWS中碳质点的疏水或亲水性以及水分子形态和动态行为的定量表征.     

Static ultrasonic oscillations induced degradation and its effect on the linear rheological behavior of novel propylene based plastomer melts

The ultrasonic degradation of novel propylene based plastomer (DP) melts with different melt viscosities was conducted in a “static” ultrasonic device where the samples were taken from various distances from the tip of an ultrasonic probe. The effects of ultrasonic time, oscillation temperature, ultrasonic intensity and the distance from the ultrasonic probe tip on the degradation behavior of DP melts as well as the ultrasonic degradation effect on the linear rheological behavior of DP melts were studied. The results show that the increase of initial melt viscosity of DP (higher molecular weight) has greater impact on the ultrasonic degradation of DP melt. The molecular weight and intrinsic viscosity of DP decrease with the increase of ultrasonic oscillation time and they approach to a limiting value. The molecular weight distribution of DP increases after ultrasonic degradation. Decreasing oscillation temperature and distance from probe tip and increasing ultrasonic intensity lead to an increase in the degradation of DP melt. The linear rheological behavior measurements of the samples obtained near the ultrasonic probe tip show that ultrasonic oscillations decrease the complex viscosity, zero shear viscosity, viscoelastic moduli, cross modulus, relaxation time and the slope of log G′ − log G″ for DP melts.